UCOM COCOON 1100 - Setting the Ringer Melody on the Handset; Locking the Key Pad; Turning Key Click On;Off; Display Contrast

16 Cocoon 1100
Cocoon 1100
7.15 Setting the ringer melody on the handset
You can change the ringer melody for an incoming call (internal or external). The unit has 18
ringer melodies to choose from (‘1’-’18’). By default, the external ringer melody is set to ‘10’
and the internal ring melody to ‘1’.
7.15.1 Setting a ringer melody for internal or external calls (1-18)
• Press the left menu key under .
• Press the up or down key / repeatedly until ‘Handset’ is selected
• Press to confirm.
• Press the up or down key
/ repeatedly until ‘Ringtone’ is selected
• Press to confirm.
•Select ‘External’ or ‘Internal’ and press .
• The current melody is shown and hearable.
• Press the up or down key / repeatedly to select the desired melody.
•Press ‘Save’ to confirm your selection or press to leave the menu
without saving.
7.16 Locking the key pad
You can lock the keypad to prevent involuntary key presses. When the keypad is locked it is
impossible to dial a telephone number, but you can still answer incoming calls.
To activate keypad lock:
• Press and hold the keypad lock key for 3 seconds.
•‘Keypad locked’ and the icon
will appear on the display.
To deactivate keypad lock:
• Press ‘ Unlock ’ followed by the keypad lock key to unlock the keypad again.
7.17 Turning key click on/off
You can set the handset to make a beep whenever you press a key.
• Press the left menu key under .
• Press the up or down key
/ repeatedly until ‘Handset’ is selected.
• Press to confirm.
• Press the up or down key
/ repeatedly until ‘Keypad Beep’ is selected.
•Select
–‘On’: turn on key click
–‘Off’: turn off key click
•Press
to confirm your selection or press to leave the menu
without saving.
7.18 Display contrast
To change the display contrast:
• Press the left menu key under .
• You can turn the handset ring volume off during ringing by
pressing the option key ‘Silent’.
• By pressing the key for 3 seconds you can disable the
handset ringer. The symbol will appear on the display. To re-
activate, press key again for 3 seconds.
10
10
15
3
10
2
3
10
2
2
3
10
2
15
7
15
7
15
3
10
2
3
10
2
15
15
*
*