UCOM COCOON 1100 - 9 Setting the Clock and Alarm; Date and Time; Hour Format; Using the Alarm Feature

18 Cocoon 1100
Cocoon 1100
Handset Name: Handset
Phone Book: Empty
Call log: Empty
Redial list: Empty
Auto Answer: Off
9 Setting the clock and alarm
9.1 Date and time
• Press the left menu key under .
• Press the up or down key
/ repeatedly until ‘Time’ is selected.
• Press to confirm.
• Press the up or down key / repeatedly until ‘Date and time’ is selected.
• Press to confirm.
• Enter the last 2 digits of the year and press ‘Save’
.
• Enter the month and press ‘Save’ .
• Enter the day and press ‘Save’ .
• Enter the hours and press ‘Save’ .
• Enter the minutes and press ‘Save’ .
9.2 Hour format
• Press the left menu key under .
• Press the up or down key
/ repeatedly until ‘Time’ is selected.
• Press to confirm.
• Press the up or down key
/ repeatedly until ‘Set Time Format’ is
selected.
• Press to confirm.
• Select the time format (12h or 24h notation) and press .
9.3 Using the alarm feature
Set the date and time and use your handset to give you a reminder alarm. You can have
different alarm settings for each handset registered to your base. The alarm rings only at the
handset, not at the base or any other handset.
If one of the alarms is set, the alarm set icon appears in standby mode on the display.
9.3.1 Set the alarm
• Press the left menu key under .
• Press the up or down key / repeatedly until ‘Time’ is selected.
• Press to confirm.
• Press the up or down key
/ repeatedly until ‘Set Alarm’ is selected.
• Press to confirm.
When you turn the handset off or when you remove the batteries, you
have to set the date and time again!
If you have Caller id on your telephone line and the operator sends date
and time, your clock will be set automatically on an incoming call.
15
3
10
2
3
10
2
2
2
2
2
2
15
3
10
2
3
10
2
2
15
3
10
2
3
10
2