Ultimaker 3 Extended - Page 2

3D PRINT - Ultimaker Extended 3
This instruction manual describes the basic operations of the Ultimaker ex-
tended 3 print.
System consists of :
• Ultimaker extended 3 : Fused Deposition Modeling (FDM)
• Build Volume : 215 x 215 x 300mm
• Nozzle diameter : two types of print cores
— Print core AA 0.4mm
— Print core BB 0,4mm (for support material PVA)
• Filament diameter: 2,85mm
• Layer Resolution: 200 to 20um
• Materials: PLA, ABS, PVA, Flexible, TPU 95A, Glass Bend
https://d3v5bfco3dani2.cloudfront.net/src/media/data/pdf/
products/um3/Ultimaker_3_specification_sheet.pdf
1