Ultimaker 3 Extended Instruction Manual

Contents
1 Start-up 3
2 Material 5
2.1 Unload the material . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Load/Change the material . . . . . . . . . . . . . . . . . . . . . . 8
2.2.1 Material 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2.2 Material 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3 Build plate 17
4 Start printing 18
5 Shutdown 20
2

Ultimaker 3 Extended Specifications

General

Build Volume	215 x 215 x 300 mm
Layer Resolution	20 - 200 microns
Print Technology	Fused Filament Fabrication (FFF)
Filament Diameter	2.85 mm
Operating System	Windows, MacOS, Linux
Print Speed	Up to 24 mm³/s
Software	Ultimaker Cura
Weight	11.3 kg
Print Head	Dual extrusion
Nozzle Diameter	0.4 mm
Supported Materials	PLA, ABS, Nylon, CPE, PVA
Connectivity	USB, Ethernet, Wi-Fi
Display	4.7" color touchscreen
Power Requirements	100 - 240 V / 50 - 60 Hz
Travel Speed	Up to 300 mm/s