3
Contents
Introduction 2
Contents 3
Safety instructions 4
CE marking 5
Contact address 5
Recycling the device 6
Connecting the inputs / outputs 7
Power supply and battery charging cable 8
Pulse and analog outputs 9
Measuring probes connector 10
USB connector 11
Applying a measuring point 12
Creating a measuring point 12
Choosing a location for the probes 12
Choosing a measuring mode 13
Positioning the probes 13
Take readings on straight pipe runs 14
Selecting the probe type 17
Fitting the probes and connecting them 18
Configuring the Minisonic 19
Description of navigation 19
Presentation of the measurement screens 22
Configuration menus 23
Set-up example 32
Low power mode 34
Software update procedure 36
Logger / Data upload and exploitation 38
To Next Page
Loading...
Need help?
General
