YK15-0009-DI-002-04
16
3. Mounting
WARNING
① You are requested to install and operate this product
with the laws and regulations relating to the safety, e.g. Fire Defense
Law, Electric wiring regulation and so on in the country and region
you use this product
. Consequently you shall be requested to attend
general safety lectures officiall
y effective in the area, such as
electrical safety, Cargo handling safety and so on. Note that any
person not attended such lectures shall be restricted from handling
this product
. Operators shall need to attend such kind of training and
have special knowl
edge, skill and title regarding the electricity,
machinery, cargo, vacuum and so on.
②
Be sure to clear any energy sources, e.g. electricity, coolant and so
on of this product before installing or removing this product.
3.1 Storage/ Installation
Install the machine horizontal to a place where there are less dust and humidity. Make a layout
taking into consideration of works such as setting, removal, check, cleaning and so on.
As for the environmental condition, please refer to “0.5.3”.
CAUTION
① Operating the Pump
on laying it down or putting it reverse would
give damage to the Pump. Ensure to install the Pump
the ground level as illustrated on the “Fig. 4 to Fig. 11”.
② By the form of the rack, the Pump
may cause resonance, and their
vibration may become big.
On this case, sandwich the protection against vibration rubber
between a pump and rack.
To Next Page
Loading...
