Ulvac VD30C - Page 9

YK15-0009-DI-002-04
v
Installation and storage
WARNING
①
This product is packed with the wooden frame. Please ask the special
agency for dismantling it.
Advise the dismantling agent to wear leather gloves and use
appropriate tools such as pinch bar as they have a risk of cutting the
hand by nail or chip.
② Gi
ve the instruction them further to use the unloading machinery such
as crane to take out this product
of the wooded frame, lift it up with
its top eyebolt and transfer it on lifting.
Check the eyebolt whether it has no error before use.
③ Only the technically entitled person should be in charge of
conducting the unloading operation and operating the unloading
machinery.
④ There is a risk that the Pump
might drop or lay down when attempted
unreasonable operation or machinery setup was not sufficient. You
are strictly restricted to enter beneath
the Pump
.
Transfer
WARNING
① You have a risk of giving damage to your back as the load la
rger than
safety standard shall be required to transfer this product.
VD30C: 58kg
VD40C: 60kg
VD60C: 90kg
VD90C: 113kg
Be sure to use the loading machinery (such as mobile crane) to lift up
the Pump
or load it on the pallet and fix it and run the Pallet truck for
its transfer.
② Never try to enter beneath the Pump unit when lifted it up.
Use
its top eyebolt
to load/unloa
d the unit.