UMD NVR User Manual
42
Add the password: Enter the password of the IPC you want to access systems.
Click on the "Add / Edit", you can add the IPC, and it will appear in the list on the left.
Automatic Search Add IPC action items:
Just click on the "Search to Add IPC" to complete the segment IPC automatic search, and
added to the IPC display list, the user can choose the IPC that needs to access to system,
click the "Add" button to add the IPC . You need simply select the IPC to be modified,
modify its parameters to complete the modification.
Supports to statistics display the real-time stream of IPC.
5.6.2 IPC delete
The user can delete the IPC access to system as required. Select the IPC to be deleted in
IPC list, click "Delete" to complete the deletion.
5.6.3 IPC channel settings
Note: This page setup feature is only for the IPC access by private agreement.
Set the output effect of the channel. Channel name, position, covering regional settings,
video parameter settings are done in this page.
Channel name: On this page you can complete the set of all the channel names,
channel name supports up to 20 Chinese characters, or 40 alphanumeric characters.
OSD position setting: channel name display position can be set by the 【OSD position
set】 page. This setting is effective immediately.
Video parameter settings: screen brightness, contrast, hue, saturation, etc. can be set.
The setting range is 0-255.
To Next Page
Loading...
General