UMD NVR User Manual
37
5.4.6 Detection alarms
All alarms through the probe input in this system known as the "Detection alarms." 1
probe default intercom calls.
In the Detection alarms page, you can set arm / disarm time, alarm output port, alarm
delay time, alarm handling, linkage video channel, PTZ linkage, video delay time according
to the alarm channel. In the Detection alarms page, you can set the alarm channel alarm
according to arm / disarm time, alarm output port, alarm delay time, alarm handling, linkage
video channel, PTZ linkage, video delay time. The system also supports to do the above set
for the IPC detection alarm probe that access to systems.
Arm / Disarm time period: according to customer needs, you can set four arming
periods during the day. Each time period cannot be crossed, and cannot set the time period
across the days. Only in the arming time, all set to take effect on detection alarm.
To Next Page
Loading...
General