UTG2000B Series 23
loaded automatically.
5. Gateway
Gateway format: nnn.nnn.nnn.nnn, range nnn: 0 to 255. It is suggested to ask the network
administrator for an available Gateway. Select Gateway, use the keypad or the dial to input
Gateway. Save this setting. When starting the instrument next time, the setting will be loaded
automatically.
6. MAC address
MAC address is initiated from 0, every stepping is 1. It is an unsigned integer shown in binary
number.
2.5.5 System
Menu Sub menu Setting Note
System
Language English, simplified Chinese,
traditional Chinese
Clock Internal, external
Clock output ON/OFF
Sound ON/OFF
Separator Comma, space, null
Backlight 10%, 30%, 50%, 70%, 90%
Load You can select factory
setting or save the setting
Save Save the setting to U disk
Arbitrary wave
management
Software
upgrade
Insert the U disk to upgrade
the software
Help Help document
About Model, version, company
info
Press Utility, System, to enter into system setting:
Note: Since there are numerous items in System, there are 2 pages, you need to press again to skip to
next page.
1. Language
Set the language of the system, press Language and select English, simplified Chinese or traditional
Chinese.
2. Clock source
To Next Page
Loading...
Need help?
General
