UTG2000B Series 7
Chapter 1 Safety Information
1.1 Safety Terms and Symbols
The following terms may appear in this manual:
Warning: The conditions and behaviors may endanger life.
Note: The conditions and behaviors may cause damage to the product and other properties. The
following terms may appear on the product:
Danger: This operation may cause immediate damage to the operator. Warning: This operation may
cause potential damage to the operator.
Note: This operation may cause damage to the product and devices connected to the product. The
following symbols may appear on the product:
Alternating Current
Ground Terminal for Testing
Ground Terminal for Chassis
On/Off Button
High Voltage
Caution
Protective Ground Terminal
CE marking
CSA International
Spectrum Management Agency of Australia
Environmental Protection Use Period (EPUP)
1SM1-A: This instrument belongs to SM Group1 Class A according to CISPR Article 4 ICES/NMB-001:
This instrument complies with ICES-001
1.2 General Safety Overview
This instrument strictly complies with the GB4793 safety requirements for electrical equipment and
EN61010-1/2 safety standard during design and manufacturing. It complies with the safety
standards for over voltage CAT II and pollution level II.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by
To Next Page
Loading...
