UNI-T UTG2122B

UTG2000B Series 27
Set Carrier Wave Frequency
Default frequency is 1kHz.Different carrier waveform has different settable frequency range. Press
Param →
Freq , enter value and select the unit.
Carrier
Wave
Frequency
UTG2122B UTG2082B UTG2062B
Minimum
Value
Maximum
Value
Minimum
Value
Maximum
Value
Minimum
Value
Maximum
Value
Sine wave
1µHz
120MHz
1µHz
80MHz
1µHz
60MHz
Square wave
1µHz
30MHz
1µHz
25MHz
1µHz
25MHz
Ramp wave
1µHz
5MHz
1µHz
4MHz
1µHz
3MHz
Impulse wave
1µHz
30MHz
1µHz
25MHz
1µHz
25MHz
Arbitrary wave
1µHz
25MHz
1µHz
20MHz
1µHz
15MHz
Modulation Source Selection
Both internal and external modulation source are compatible. After enabling AM function, the
default modulation source is internal. If need to change press
Param → Source →
External .
1) Internal Source
Modulation wave can be: sine wave(default), square wave, rising ramp wave, falling ramp wave,