40 UTG2000B Series
Carrier Wave Waveform Selection
PM carrier waveform can be: Sine wave, square wave, ramp wave or arbitrary wave (except DC),
and the default is sine wave. Press Carrier soft key to select carrier waveform.
Carrier Wave Frequency Setting
If you need to set up the carrier wave frequency,see Carrier Wave Frequency Setting
Modulation Source Selection
This device can select internal modulation source or external modulation source. After enabling PM
function, the default of modulation source is internal. If need to change, press Param →
Source
→ External in turn.
To Next Page
Loading...
