ONE-TOUCH SPEED DIALING FROM THE BASE [24]
www.uniden.com
One-touch Speed Dialing from the Base
The base has 4 one-touch speed dial locations (
[A]
,
[B]
,
[C]
and
[D]
) that can be programmed for special or
frequently dialed numbers. Use the following steps to set up these speed dial numbers:
1) With the base in standby, press and hold
[A]
,
[B]
,
[C]
or
[D]
.
If the key already has a number programmed, the Edit screen
appears. You can select EDIT NUMBER to edit this entry,
select DELETE NUMBER to erase this entry or select GO
BACK to return to the previous screen.
2) Store the number by following step 6 under Storing Names
and Numbers for Speed Dialing on page 27.
3) Press
[menu/set]
on the base. You will hear a confirmation
tone, and NUMBER STORED appears. Memory storage is
complete.
Note:
• When editing these Speed Dial numbers, you must press a key within 30 seconds or the phone will
return to standby.
• The One-touch Speed Dial number can be up to 48 digits.
To make a call from a one-touch speed dial, simply press one of the one-touch speed dial keys
[A-D]
, and
your phone will automatically dial the number.
#
0WODGT5VQTGF
ONE-TOUCH SPEED DIALING
FROM THE BASE
To Next Page
Loading...
Need help?
General
