SPEED DIALING FROM THE CORDLESS HANDSET [28]
www.uniden.com
7) Press
[select/intercom]
. You will hear a confirmation tone.
8) After about 2 seconds, the speed dial entries will appear.
9) Press
[memory]
to exit memory setup mode. The phone returns to
standby.
Storing Caller ID Information to Speed Dial Locations
Caller ID names & numbers shown in the Caller ID list can be stored to a speed dial location.
For instructions on viewing the Caller ID information, see page 42. If the Caller ID information did not
include the phone number, then you will not be able to store it.
Follow these steps to store a Caller ID name and number to a speed dial location:
1) Press
[CID]
. Select the phone number to be stored from the Caller ID list
by pressing
[volume/ /+]
or
[volume/ /
-
]
.
2) Press
[memory]
.
'ORV[
SPEED DIALING FROM THE
CORDLESS HANDSET
To Next Page
Loading...
Need help?
General
