4343
Setting Up the
Answering System
Setting Up the Answering System
You can set up your answering system’s features from the handset. Only one handset at a time can access the
answering system menus.
Note: If you have multiple bases, select the base with answering system you want to access (see page
15).
Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a
call: “Hello, no one is available to take your call. Please leave a message after the tone.” You can record your own
personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.
Press
/MUTE. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press
5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press
8 to start the recording. The system announces, “Record greeting.” Begin recording after the
announcement.
When you nish recording, press 8 again or press 5. You will hear a conrmation tone, and your recorded
greeting plays back for you.
Selecting a Greeting
Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can
also switch back and forth between the pre-recorded greeting and your own greeting at any time.
Press
/MUTE. The system announces the number of new and old messages, then starts to play the
messages unless it has no messages.
Press
5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the
system is in the command waiting mode.
Press
6. The system plays the current greeting.
1)
2)
3)
4)
1)
2)
3)
To Next Page
Loading...
Need help?
General
