Uniden DECT1580 User Manual

8
Installing the Phone
9
Connecting the AC adapter
To the base
To avoid risk of re and shock, only use the Uniden PS-0009 AC adapter with the base.
To the DCX150 charging cradle (for multi-handset packs only)
Use only the Uniden
PS-0007 AC adapter
with the DCX150
charging cradle.
Don’t put any power cord where it people might
trip over it or step on it. If a power cord becomes
chafed or worn out, it can create a fire or
electrical hazard.
Route the cord through the
molded wiring channel.
Connect the AC adapter to the DC IN 9V jack
on the back of the base.
Connect the AC
adapter to a
standard 120V
AC wall outlet.
Don’t put any power cord where it people might
trip over it or step on it. If a power cord becomes
chafed or worn out, it can create a fire or
electrical hazard.
Route the cord through the
molded wiring channel.
Connect the AC adapter to the DC IN 9V jack
on the back of the base.
Connect the AC
adapter to a
standard 120V
AC wall outlet.
Connect the AC adapter to the
DC IN 9V jack as shown.
(It may already be connected.)
Connect the AC adapter
to a standard 120V AC
wall outlet.
Connect the AC adapter to the
DC IN 9V jack as shown.
(It may already be connected.)
Connect the AC adapter
to a standard 120V AC
wall outlet.

Uniden DECT1580 Specifications

General

Type	DECT telephone
Answering machine	Yes
Phonebook capacity	70 entries
Redial list capacity	5
Call list capacity phonebook	30
Backlight color	Yellow
Frequency band	1.9 GHz
Mac compatibility	No
Product color	Black, Silver
Operating temperature (T-T)	0 - 50 °C
Battery type	BT-1015
Standby time	168 h
Battery capacity	650 mAh
Power supply type	AC/DC
Battery technology	Nickel-Cadmium (NiCd)
Power requirements	AC 120V@60Hz