47
Using the Answering
System
Using the Answering System
Turning Your Answering System On and Off
From the base From the handset
Turning On
With the phone in standby, press
ANSWER ON/OFF
.
The system announces “Answering System
is on” and plays the current greeting.
The
message counter LED displays the
number of messages stored in memory.
If the counter ashes, then you have new
messages waiting.
1)
2)
3)
Press MENU/SELECT.
Select the
Ans. Setup menu, and then the
Ans. On/Off submenu.
Move the cursor to select
On.
Press MENU/SELECT. You will hear a
conrmation tone.
1)
2)
3)
4)
Turning Off
With the phone in standby, press
ANSWER ON/OFF
.
The phone announces “Answering System
is off.”
The
message counter LED is no longer
illuminated.
1)
2)
3)
Press MENU/SELECT.
Select the
Ans. Setup menu, and then the
Ans. On/Off submenu.
Move the cursor to select
Off.
Press MENU/SELECT. You will hear a
conrmation tone.
1)
2)
3)
4)
Notes: • If the answering system announces “No remaining time” when you turn it on, the memory is full (the
message counter LED also shows FL). The answering system can’t record any new messages until you
delete some of the saved ones.
• If you do not set the clock, your messages may not have the correct day and time stamp. To set the clock,
see page
23.
To Next Page
Loading...
Need help?
General
