Uniden DECT1580 User Manual

10
11
Installing the Phone
Testing the Connection
Pick up the handset from the cradle and press TALK/FLASH. You should hear a dial tone, and the display
should show
Talk.
What if I can’t hear a dial tone?
Check the telephone cord connection on the base.
What if the display doesn’t show
Talk?
Check the battery pack connection in the handset.
Make sure the battery pack is fully charged.
Make sure the AC adapter cord is securely connected to the
DC IN 9V jack and a standard power outlet.
Try resetting the handset (see page 60).
Make a quick test call, and then press
END to hang up.
What if there is a lot of static?
Check the sources of interference described in Choosing the
Best Location (see page 6): is the base near any of those?
What if the call doesn’t go through?
Try changing the dialing mode (see the next section).
Note: Make sure you can get a dial tone on any accessory handsets that were packaged with your phone.
•
•
•
•

Uniden DECT1580 Specifications

General

Type	DECT telephone
Answering machine	Yes
Phonebook capacity	70 entries
Redial list capacity	5
Call list capacity phonebook	30
Backlight color	Yellow
Frequency band	1.9 GHz
Mac compatibility	No
Product color	Black, Silver
Operating temperature (T-T)	0 - 50 °C
Battery type	BT-1015
Standby time	168 h
Battery capacity	650 mAh
Power supply type	AC/DC
Battery technology	Nickel-Cadmium (NiCd)
Power requirements	AC 120V@60Hz