MiCard MultiTech4
14
4. Click Program Image.
5. This completes the configuration of the MiCard MultiTech4 reader.
6 MiCard MultiTech4 BLE
The MiCard MultiTech4-P BLE & MiCard MultiTech4-PI BLE can work in the frequencies
of 125 kHz, 134.2 kHz, 13.56 MHz, and the BLE frequency range. To use the BLE
functionality, you need to use an Android/iOS smartphone and the NT-ware Mobile
Badge BLE app.
The following readers are using the Nano chipset:
MiCard MultiTech4-P BLE
MiCard MultiTech4-PI BLE
For Canon CMFP devices (not eULM), select Encrypted NT-ware Nano CMFP V3.23,
App NT-ware CMFP V1.01 when configuring the app (see Example configuration of the
app (on page 17)).
To Next Page
Loading...
