The MiCard MultiTech4 readers can be configured to support multiple different card
technologies at the same time, regardless of technology and frequency range. There is
no limit on the amount of different configured transponder types.
6.2.2 Creation of the app
In this step the .bix and .abp file are created.
The .abp file is the project configuration file for the AppBlaster (NT-ware Edition)
which stores the configuration of the card reader.
The .bix file is the image file which must be uploaded to the card reader to activate the
configuration on the card reader.
1. Select Version Information.
2. Type a unique identifier as App Character (max. 4 characters).
To Next Page
Loading...
