The Background mode is currently in Beta phase on the Android app.
In case you encounter problems with the Background mode, please disable this
setting. The setting is disabled by default.
6.1.4 Configuration in uniFLOW / uniFLOW Online
The Phone ID will be stored as a Card Identity in uniFLOW / uniFLOW Online. The card
learning functionality (Card Registration Code / Username/Password) needs to be
activated accordingly. No further configuration within uniFLOW / uniFLOW Online
required.
6.2 Configuration example
The customer would like to use the HID Prox cards. Additionally, the customer would
like to use smartphone authentication.
The following transponder types must be enabled:
BLE 2.0
HID Prox
The following chapters explain how to use the AppBlaster (NT-ware Edition) to
configure the card reader(s). The topics are based on an example configuration for the
above-mentioned transponder types.
6.2.1 Example configuration of the app
Now that we know which transponder types to configure, we have to configure the
App of the device utilizing the AppBlaster (NT-ware Edition). The firmware
configuration file is called App in the following chapters.
The customer would like to limit the usage to HID Prox and BLE 2.0 transponder types.
To Next Page
Loading...
