18 Basic functions
Basic functions
Answering a call
Special default ring signalling is set for your telephone:
• When you receive an internal call, your telephone rings once every four sec-
onds (single-tone sequence).
• When you receive an external call, your telephone rings twice in rapid succes-
sion every four seconds (dual-tone sequence).
• When you receive a call from the entrance telephone, your telephone rings
three times in rapid succession every four seconds (triple-tone sequence).
• If a call is waiting, you hear a short tone (beep) every six seconds.
The number or the name of the caller appears on the display.
Answering a call via the handset
The phone rings. The caller appears on the screen.
^ Lift the handset.
+ or - Raise or lower the volume. Keep pressing the key until the desired volume is set.
Please read the introductory chapter "Getting to know the OpenStage"
Page 11 carefully before performing any of the steps described here on
your phone.
Your service personnel can adjust the ring cadence for external and inter-
nal calls for you. In other words, different ring cadences can be set for dif-
ferent internal callers.
To Next Page
Loading...
Need help?
General