52 Programming the function keys
Programming a procedure key
Numbers and functions that require further input, i.e. which contain several op-
erating steps, can be saved on a key on your telephone. The relevant service
personnel must have granted the appropriate authorisation.
For example the function "Associated dialling" Page 39 together with the re-
quired input (phone number of the phone for which the call is to be made +
phone number to be dialled) can be saved on a key.
Numbers that require further input can also be saved.
N Open the Program/Service menu Page 17.
Select and confirm the option shown.
S Press the key shown.
Confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
j Enter procedure. Example: *67 231 123456
*67 Code for associated dialling
231 Number of the phone for which the call should be made
12345 The number to be dialled
if nec. S Press the "Pause" key to enter pauses (a "P" appears on the display).
Confirm the option shown.
or If you make a mistake:
Select and confirm the option shown. This deletes all entered digits.
Confirm the option shown.
or
Select and confirm the option shown.
Select the saved procedure by pressing the key.
Procedures with activatable/deactivatable functions are activated by
pressing the key once and deactivated by pressing it again.
You can press the procedure key during a call to automatically send the
saved digits as DTMF signals
Page 45. For display messages when
saving procedures, see Page 87.
To Next Page
Loading...
