Programming the function keys 51
Tr u n k g r o u p k ey :
S At least one trunk is free.
R All lines in this trunk group are occupied.
View call charges:
S No chargeable calls have been set up since the last check.
R Chargeable calls have been set up since the last check.
Call forwarding, Forward line:
T Flashing slowly - your line is a call forwarding destination.
Fax/answering machine details:
S No fax received or no message on the answering machine.
R Fax received or message on the answering machine.
View the number of calls:
S No waiting callers.
T Flashing quickly - callers waiting (certain number is exceeded).
Flashing slowly - callers waiting (certain number is reached).
Data I/O service:
S No connection to an application.
R Active connection to an application.
T Flashing slowly - connection to an application is temporarily interrupted.
The following functions programmed on keys do not have a LED function:
Repdial key (external), Procedure key, Trace call, Speed dial, Clear, Lock all
phones, Send message, Directory (1=internal, 2=LDAP), Call waiting, Toggle/
Connect, Conference, Speaker call, Retrieve line, Reserve trunk, Release trunk,
Temporary phone, Override, Park a call, Pickup - directed, Pickup - group, Ac
-
count code, Show call charges, Page, Answer page, Timed reminder, Open
door, DTMF dialling, Recall key, Room monitor, Hold key, Consult internal, Con
-
sultation, Associated dial, Associated serv., Tel. data service, Change number,
Discreet call.
To Next Page
Loading...
