Unify openstage 15 T hipath 3000

42 Enhanced phone functions
Parking a call
You can park up to ten internal and/or external calls. Parked calls can be dis-
played and picked up on another telephone. This feature is useful, for example,
if you want to continue a call at another phone.
Prerequisite: You are conducting a call.
N Press the key shown.
Select and confirm the option shown.
0 ... 9 Enter the number of the park position (0 - 9) and make a note of it. If the park
position number you entered is not displayed, it is already in use; enter another
one.
Retrieving a parked call
Prerequisite: One or more calls have been parked. 
The phone is idle.
N Press the key shown.
Select and confirm the option shown
1
.
0 ... 9 Enter the park position number you noted earlier.
If the park position number you enter is not in use, you cannot retrieve the call.
*56=Park a call?
Retrieve call?
1. ”Differing display view in a HiPath 4000 environment”  Seite 86
If a parked call is not picked up, after a specific period of time the call is re-
turned to the telephone from where it was parked (recall).