Unify openstage 15 T hipath 3000

Programming the function keys 49
Programming the function keys
You can program frequently used functions, station numbers or procedures onto
the function keys on your OpenStage
15 T or key module.
Configuring function keys
See also  Page 14.
Example: Programming the Shift key
N Open the Program/Service menu  Page 17.
Select and confirm the option shown.
S Press the key shown.
Confirm the option shown.
Select and confirm the option shown.
Confirm the option shown.
if nec.
Select and confirm the option shown.
Some functions (e.g. with "Call forwarding") cannot be saved completely.
This
means that when later initiating the function by pressing the button, further
inputs are required.
Confirm the option shown.
or
Select and confirm the option shown.
The label appears automatically and cannot be changed for the Shift key. It can
be changed for all other functions.
The LED displays  Page 14 and  Page 50 show the status of the function.
A list of all available functions is displayed, see the overview  Page 50.
*91=Prog. feature key
Change key
More features g
Shift key
Save incomplete
Exit
Another key