50 Programming the function keys
Overview of functions
The functions are split into the following menus:
• Destinations
• Control relay
• PIN and authorisation
• Calls
• More features
Saved function LED messages
Call forwarding, Forwarding - trunk, Forward line, Night answer, Do not
disturb, Telephone lock, Advisory message, Ringer cutoff, HF answerback
on/off, Join/leave group, Caller ID suppression, Call wait.trm., Waiting tone
off, Ring transfer, Recording, Door opener on/off, Control relay (only for
HiPath
3000), Ringing group on, Shift key, UCD (Available on/off, Work on/
off), Night answer on/off, MULAP Privacy Release:
S Saved function is not activated.
R Saved function is activated.
Callback:
S You have no entry for callback.
R You have an entry for callback.
Repdial key (internal), Direct station select:
S Party not on a call.
R Party is on a call or has activated DND.
T Flashing quickly - I'm being called, please accept.
Flashing slowly - another party is being called and has not yet answered.
Call key, General call key, Trunk key, MULAP key, Assign number:
S No call via corresponding trunk.
R Active call via the corresponding trunk.
T Flashing quickly - call on the corresponding trunk, call pickup is possible by
pressing the key.
Flashing slowly - a call is placed on hold on the relevant trunk.
The available functions depend on your configuration. If a function is miss-
ing, consult your service personnel.
To Next Page
Loading...
