Unify openstage 15 T hipath 3000

36 Enhanced phone functions
Making calls using system speed-dial numbers
Prerequisite: You know the system speed-dial numbers (consult your service
personnel).
N Press the key shown.
Select and confirm the option shown
1
.
j Enter a three-digit speed-dial number.
if nec. Suffix dialling
j If necessary, you can suffix-dial additional digits (for example, the user's exten-
sion) at the end of the saved station number.
If this feature is configured, a suffix is automatically dialled (for example, "0" for
the exchange) if no entries are made within 4 or 5 seconds.
Dialling with speed-dial keys
Prerequisite: You have configured speed-dial keys  Page 36.
N Press the key shown.
Select and confirm the option shown
[1]
.
) Press the key shown.
j Press the required speed-dial key.
Configuring a speed-dial key
You can program the keys 0 to 9 with ten frequently used phone num-
bers.
N Press the key shown.
Select and confirm the option shown
[1]
.
Confirm the option shown.
) Press the key shown.
j Press the required speed-dial key. If the key is already in use, the programmed
phone number appears on the screen.
Confirm the option shown.
j First enter the external code and then the external station number.
Confirm the option shown.
*7=Use speed dialling?
1. ”Differing display view in a HiPath 4000 environment”  Seite 86
*7=Use speed dialling?
*92=Change speed dial?
Change?
Change
Save