EasyManua.ls Logo

Unify openstage 15 T hipath 3000

Unify openstage 15 T hipath 3000
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
More functions/services 65
Fax details and message on answering
machine
If a fax or answering machine is connected to your system and you have as-
signed the "Fax details" function to a programmable key Page 49, the key
lights up when a fax or a message has been received.
Deactivating signalling
R Press the illuminated "Fax service" key. The LED goes out.
Changing a number (after exchanging/
moving/relocating a phone)
When configured (consult your service personnel), you can move your number
to any other phone.
Your phone to date is then assigned the old number of your new phone; the num-
bers including phone settings (e.g. programmed keys) are exchanged.
Prerequisite: Your old and new telephone are the first telephones at each con-
nection. The telephones are in idle state.
The following procedure is carried out on the new phone.
N Press the key shown.
Select and confirm the option shown.
j Enter own station number.
j Enter code (telephone lock) Page 60.
(Not necessary if you have not set a code.)
Confirm the option shown.
Relocate?
Complete relocate?
If you change numbers of different system phones, programmed keys are
replaced with the default assignment.
You can however connect your phone to a different port and then carry out
the procedure.

Table of Contents

Related product manuals