Unify openstage 15 T hipath 3000

76 Making calls in the team/executive/secretary configuration
Deactivating call forwarding
N Open the Program/Service menu  Page 17.
Select and confirm the option shown.
R Press the required trunk key.
or
j Enter the required trunk number.
or
R If available, press the "CFW MULAP" key.
Understanding LED messages of the "CFW MULAP" key
S The LED on the "CFW MULAP" key is off – call forwarding is not active for this
trunk.
or
R The LED on the "CFW MULAP" key lights up – call forwarding is active for this
trunk.
or
T The LED on the "CFW MULAP" key flashes slowly - the trunk is the destination
of call forwarding.
Forward Line: Off
If you have activated call forwarding for a trunk, a special dial tone sounds
when the line is seized.