TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
21
5. Maintenance
3 In a web browser, enter the address to the License Web:
“https://www.xxxxxxxxxx“
The License Web is used for;
• Importing the product information file
• Viewing/Purchasing the license(s) for the handset(s)
• Downloading the license file containing the license key(s) for the handset(s)
See the online help on the License Web for information on how to use the
License Web.
4 When the license file (.XML) containing the license key(s) is downloaded from
the License Web, select File > Import > Licences in the WinPDM to import the
file.
5 When the file is imported, the license key(s) is downloaded to the handset(s),
and the handset restarts. See also
5.1.7 Upgrade Handset Functionality using
License on page 20 to view the handset’s license option(s).
If the handset is updated to a new device type (to WL3 Messenger Upgrade
License), both the new device and the old device are displayed in WinPDM. The
old device has to be manually removed.
Manual license upgrade
Use this option if the serial numbers of the handset cannot be exported to a file
because a WinPDM is not in use. The serial number(s) must be manually entered in
the License Web to get the corresponding license key for the handset. The license key
must also be manually entered in the handset. See the online help on the License Web
for information on how to get a license key.
TIP: If several handsets are upgraded, it is recommended to use License upgrade
using import/export on page 20.
The license key is added using the Admin menu in the handset, see 9.1 Admin Menu
Tree on page 71 for information on how to activate the Admin menu.
TIP: It is also possible to press *#35# in idle mode for quick access to the “Enter license
key“ menu.
1 Press the soft key “Menu“.
2 Select “Calls“.
3 Select “Admin menu“.
4 Select “Enter license key“.
5 Enter license key without blanks.
6 Press “OK“.
If the license key is valid, a dialog window “License key accepted“ is shown. The
handset restarts.
If the handset has been updated to a new device type (to WL3 Messenger Upgrade
License), both the new device and the old device are displayed in WinPDM. The old
device has to be manually removed.
Move License
It is possible to move a product license (WL3 Messenger Upgrade License) to an
unlicensed handset. Any optional licenses follow. For example, aWL3 Messenger
Upgrade license can be moved from a handset with a broken display to an unlicensed
handset. The broken handsetcan then be sent for repairs.
To Next Page
Loading...
Need help?
General