EasyManuals Logo

Unify OpenStage WL3 Administration Manual

Unify OpenStage WL3
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
45
6. Handset Configuration
Create a Company Phonebook File
The company phonebook file (.cpb) is normally created from an Excel file using a script
to extract the information and create the phonebook file (.cpb). The Excel file,
“Company Phonebook.xls“ is delivered from your supplier.
The format of the rows in the phonebook file is:
<Name><tab><phone number><carriage return>
followed by additional rows for each entry.
The handset supports a maximum length of 24 characters in each field, additional
characters are truncated when the phonebook file is created. The following characters
are accepted in the handset number field in the phonebook file, but are ignored when
the phonebook file is created: “(“, “)“, “-“ and “ “(space).
6.5.19 Central Phonebook
NOTE: This is a system dependent feature.
If the network is equipped with a messaging server with a phonebook service, the
Central Phonebook on that server can be accessed from the handset.
1 Select Device > Message centre.
2 In the Central phonebook field, enter the number to the Central phonebook
The number to be used is set to default 999999. If the system is not equipped
with a Central Phonebook, this menu option can be removed from the handset
by entering an empty value.
6.6 Profiles
It is possible to set up an own profile for incoming calls, message alerts, vibrating
alerts, key sound etc. This can be useful when there are many users on the same
handset, and they want different sound profiles. It can also be used for temporary
settings, for example while in a meeting, incoming calls should be silent.
Profiles are configured through parameters in the “User Profiles“ folder.
1 Select User Profiles > User Profiles X (where X represents the Norma profile
(default) or Profile 1- 4).
2 The following settings for the profile can configured:
Profile name
Internal/External/Callback ring signal
Ring volume
•Vibrator
Key sound
Message alert signal
Diversion settings
Answering settings
Alarm settings
Diversions
Calls can be diverted to other phone numbers, for example when busy.

Table of Contents

Other manuals for Unify OpenStage WL3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unify OpenStage WL3 and is the answer not in the manual?

Unify OpenStage WL3 Specifications

General IconGeneral
BrandUnify
ModelOpenStage WL3
CategoryHandsets
LanguageEnglish