EasyManuals Logo

Unify OpenStage WL3 Administration Manual

Unify OpenStage WL3
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
72
9. Administration
9.2 Quick Access to the Handset’s Device Information
For quick access to device information, short codes can be used from the idle mode
menu. To display this information, enter the following codes in the handset.
NOTE: Other settings and information can be found on the internal web administration
page, refer to section
8. Handset Internal Web Administration Page on page 69.
9.3 LED indications
The following table shows the LED indications that are used for the handset.
Information Code
Software version *#34# > Software
WLAN version *#34# > Software
Hardware version *#34# > Hardware
IP address *#34# > Network info
Subnet mask *#34# > Network info
Default gateway *#34# > Network info
MAC address *#34# > Hardware
Current license *#34# > License
Current BSSID *#76#
Current ESSID *#76# or *#34#
Current RSSI *#76#
Current channel *#76#
Site survey functions *#77#
LED indication Description
None Switched off.
Green, fixed Handset fully charged and in charger.
Green, flashing, slow Switched on, but not in charger.
Orange, fixed Charging
Orange, flashing Low battery
Red, fixed Software error. Service needed.
Red, flashing Very low battery
Red, flashing, slow: No network connection.

Table of Contents

Other manuals for Unify OpenStage WL3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unify OpenStage WL3 and is the answer not in the manual?

Unify OpenStage WL3 Specifications

General IconGeneral
BrandUnify
ModelOpenStage WL3
CategoryHandsets
LanguageEnglish