EasyManuals Logo

Unify OpenStage WL3 Administration Manual

Unify OpenStage WL3
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
23
5. Maintenance
WinPDM and WSG.
If you only have WinPDM, see 5.2.4 Replacement of Handset with WinPDM Only.
Data included in a replacement transfer
The following data is replaced during a replacement:
User parameters
Contacts (entered by the user)
Note that the following data is not replaced:
Call list
Messages
Company phonebook
Downloaded language
Certificates
•Licenses
1
5.2.2 Replacement of Handset with WSG
There are two different replacement procedures as follows:
If the broken handset and the spare handset have the same device type and
functionality license, see
Replace without Move Licenses in WSG.
If the broken handset and the spare handset do not have the same device type and/
or functionality license, the license must be moved to the spare handset, see
Replace and Move Licenses in WSG on page 23.
Replace without Move Licenses in WSG
Both the broken handset and the spare handset must be of the same device type and
have same functionality license.
1 In both handsets, press *#34# in idle mode and select “License“ to check that
they have same device type and licenses.
If the login screen is displayed in the spare handset, press “Info“, and select
“License“.
2 If the broken handset is online in the Device Manager, switch off the handset to
make it offline.
3 Take a spare handset prepared with the network settings (including the IP-
address to the WSG).
4 Enter the number and leave the password blank. Press “Login“.
The spare handset is automatically updated from the WSG and might be restarted
depending on the changed settings. The last stored settings for the broken handset in
the WSG are transferred to the spare handset.
Replace and Move Licenses in WSG
The broken handset and the spare handset do not have the same device type and/or
have the same functionality license.
1. A handset’s license(s) can be moved to an unlicensed handset (WSG) if following the replacement instructions in
Replace and Move Licenses in WSG on page 23.

Table of Contents

Other manuals for Unify OpenStage WL3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Unify OpenStage WL3 and is the answer not in the manual?

Unify OpenStage WL3 Specifications

General IconGeneral
BrandUnify
ModelOpenStage WL3
CategoryHandsets
LanguageEnglish