Unify OpenStage User Manual

c04.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
109
Nur für den internen Gebrauch Phone Parameters - Administration
System
Connectivity
check timer
(seconds)
voip-
connectivity-
check-interval
Integer 10 to 3600
(seconds)
0 disables the
check.
Default: 120
When set to a non-zero
value, test messages will
be sent at the defined in-
terval to check the TLS
connection. Relates to
sending of keep-alive
message. For keyset
working, applies to all
lines.
Keep alive
format
sip-keepalive-
method
Enumer-
ation
0="Sequence";
1="CRLF"
Default: 0
Selects the keep-alive
method to be used
between Comms and the
switch. Ignored for a TCP
keep alive.
Media
Negotiation
media-
negotiation-
mode
0="Single IP";
1="ANAT"
When Media negotation
is set to "ANAT", ANAT is
supported; the phone will
re-register with the SIP
server and advertise
ANAT support in the SIP
header. When set to "Sin-
gle IP", ANAT support is
disabled.
Available with OpenStage
V3.
Media IP Mode sip-media-IP-
mode
0="IPv4";
1="IPv6";
2="IPv4_IPv6";
3="IPv6_IPv4"
Defines which IP version
is to be used for voice
transmission. With "IPv4",
only IPv4 is used; with
"IPv6", only IPv6 is used;
with "IPv4_IPv6", both
IPv4 and IPv6 can be
used, but IPv4 is pre-
ferred; with "IPv6_IPv4",
both IPv6 and IPv4 can
be used, but IPv6 is pre-
ferred.
Available with OpenStage
V3.
WBM Name Item name Type Values Description

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing