Unify OpenStage User Manual

Phone Parameters - User Nur für den internen Gebrauch
A31003-S2000-R102-16-7620 02/2016
224 Provisioning Service, Developer’s Guide
c05.fm
Configuration
5.3 Configuration
5.3.1 Outgoing calls
WBM Name Item name Type Values Description
Autodial delay
(seconds)
autodialtimer Integer 1 to 9
Default: 6
After this delay, which
follows the last digit en-
tered, a number is di-
aled.
Allow callback:
busy
callback-busy-
enabled
Boolean true/false
Default: true
Permits sending a call-
back request to the
server when the re-
mote party is busy.
Allow callback:
no reply
callback-ring-
enabled
Boolean true/false
Default: true
Permits sending a call-
back request to the
server when the re-
mote party does not
answer the call.
Allow busy
when dialing
busy-when-
dialling-
enabled
Boolean true/false
Default: false
If enabled, the phone
switches to busy state
when the user starts di-
aling.
Allow transfer
on ring
allow-transfer-
on-ring-enabled
Boolean true/false
Default: true
If enabled, it is possible
to transfer a call to an-
other party without any
previous consultation
with this party.
Allow immediate
dialing
hot-keypad-di-
aling
Boolean true/false
Default: false
If enabled, immediate
dialing is executed as
soon as the entered
string matches
a dial plan entry.

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing