Unify OpenStage User Manual

Basic Communication Procedures Nur für den internen Gebrauch
A31003-S2000-R102-16-7620 02/2016
32 Provisioning Service, Developer’s Guide
c03.fm
Phone Driven Interactions
3.5 Phone Driven Interactions
Three different kinds of activities initiated by phones can be distinguished:
1. Register with the provisioning service after startup, either initial startup, subsequent resets
or a factory reset.
2. Inform the provisioning service about local configuration changes, even in case of a factory
reset.
3. Inform the provisioning service about the status of a software or file deployment.
3.5.1 An Exemplary Startup Interaction
3.5.1.1 Message Flow
On startup, the phone informs the provisioning service about its existence. The following dia-
gram shows an example message flow which might occur on phone startup:
>
Please ensure to provide the phone with the contact address of the provisioning
service (see Section 2.2, "Extended Configuration"). Otherwise, it will not be
able to register with the provisioning service after a factory reset.
>
Please ensure to provide the phone with the contact address of the provisioning
service (see Section 2.2, "Extended Configuration"). Otherwise, it will not be
able to register with the provisioning service after a factory reset.
Phone Provisioning Service
1 HTTPS Request
Reason for contact: start-up
<Basic data items>
2 HTTPS Response
Action: ReadAllItems
3 HTTPS Request
Reason for contact: reply-to
<All data items>
4 HTTPS Response
CleanUp

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing