Unify OpenStage User Manual

c03.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
85
Nur für den internen Gebrauch Basic Communication Procedures
Tracing and Debugging
3.9 Tracing and Debugging
Besides the error handling capabilities described above, the phone provides detailed tracing
information about the communication between phone and provisioning service. To enable this
functionality via the WBM, proceed as follows:
• Open the WBM in your browser, log in to the "Administrator Pages", and navigate to
"Diagnostics" > "Fault trace configuration".
• Under "Trace levels for components", set the trace level for "DLS client management", e.g.
"DEBUG", and set all other trace levels to "OFF".
• Confirm the changes by clicking "Submit".
• When the processes to be traced are finished, you can view the tracing data by clicking on
the link "Download trace file" under "Diagnostics" > "Fault trace configuration".
The tracing facility can also be configured and controlled by the provisioning service; see Sec-
tion 4.13.3, "Fault trace configuration".

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing