Unify OpenStage User Manual

c05.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
235
Nur für den internen Gebrauch Phone Parameters - User
Configuration
5.3.6 BLF
As the BLF parameters are already described in the administrator chapter, only cross-referenc-
es to the corresponding section are given here.
5.3.7 Bluetooth
WBM Name See
Monitored phone
(read only)
Section 4.4.5.3, "BLF"
Audible alert Section 4.4.5.3, "BLF"
Popup on alert Section 4.4.5.3, "BLF"
>
This function is available on OpenStage phones.
WBM Name Item name Type Values Description
Bluetooth device
address
bt-local-bda Te x t .
Char(17).
Same format as
MAC address
Bluetooth address of the
phone. This value is read
only. OpenStage 60/80
only.
Phone name Not applicable
Status Not applicable
Active Not applicable
Discoverable Not applicable
Pairing mode Not applicable
PIN for pairing Not applicable
Last connected
device - Device
address
Not applicable
Last connected
device - Device
name
Not applicable

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing