Unify OpenStage User Manual

c04.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
115
Nur für den internen Gebrauch Phone Parameters - Administration
System
Allow refuse refuse-call Boolean true/false
Default:
true,
OS40 US/
DPIP35 /
DPIP55:
false
Defines whether the
Refuse call feature is
available on the phone.
Hot/warm phone hot-line-warm-
line
Enumer-
ation
1=No action;
2=Hot phone;
3=Warm
phone
The number specified in
Hot/warm destination is
dialed immediately (hot
phone) or after a
configurable delay (warm
phone) when the user
goes off-hook.
Available with OpenStage
V2.
Hot/warm desti-
nation
hot-line-warm-
line-digits
Text Call number. Number to be dialed
when Hot phone or Warm
phone is enabled.
Available with OpenStage
V2.
Initial digit timer
(seconds)
initial-digit-
timer
Integer 1 to 120
(seconds)
Default: 30
Timeout for entering the
first digit after going off-
hook. On expiry, the
phone will change to idle
mode.
Available with OpenStage
V2.
Allow uaCSTA uaCSTA-enabled Boolean true/false
Default: true
If set to true, applications
which support the
uaCSTA standard will
have access to the
phone.
WBM Name Item name Type Values Description

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing