Unify OpenStage

c04.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
197
Nur für den internen Gebrauch Phone Parameters - Administration
Security and Policies
4.10.1.4 Character Set (V3)
Current status user-pwd-
status
Enumer-
ation
0="active";
1="suspended";
2="disabled"
Default: 0
When set to "active", the
user password is avail-
able for use. With "sus-
pended", the user pass-
word is not available for a
period or until reset.
When set to "disabled",
all access via the user
password is disabled.
WBM Name Item name Type Values Description
Ucase chars
reqd.
pwd-upper Integer 0 to 24
Default: 0
Defines the minimum
number of uppercase
characters.
Lcase chars
reqd.
pwd-lower Integer 0 to 24
Default: 0
Defines the minimum
number of lowercase
characters.
Digits required pwd-digit Integer 0 to 24
Default: 0
Defines the minimum
number of digits.
Special chars
reqd
pwd-punct Integer 0 to 24
Default: 0
Defines the minimum
number of special charac-
ters. The set of possible
characters is ` - = [ ]
; ’ # \ , . / ¬ ! ”
£ $ % ^ & * ( ) _ +
{ } : @ ~ | < > ?
Bar repeat length pwd-
sequence-
length
Integer 0 to 24, but not 1
(with 1 set as val-
ue, no password
would be valid,
because it would
be forbidden to
use any charac-
ter once)
Default: 0
Specifies the maximum
number of consecutive
uses of a character.
WBM Name Item name Type Values Description