Unify OpenStage User Manual

Phone Parameters - User Nur für den internen Gebrauch
A31003-S2000-R102-16-7620 02/2016
230 Provisioning Service, Developer’s Guide
c05.fm
Configuration
5.3.2.4 Handling
5.3.2.5 CTI calls
WBM Name Item name Type Values Description
Allow call waiting call-
waiting-
enabled
Boolean true/false
Default: true
If set to true, the user
can accept a second in-
coming call in the course
of an ongoing call.
Allow DND call-dnd-
enabled
Boolean true/false
Default: true
If set to true, the phone
will not ring, and the caller
hears the busy signal.
Allow busy when
dialling
busy-when-
dialling-
enabled
Boolean true/false
Default: false
If set to true, an incom-
ing call received while the
user is dialing is rejected.
WBM Name Item name Type Values Description
Allow auto-
answer
auto-answer Boolean true/false
Default: false
If set to true, calls are
accepted and set up auto-
matically.
Allow beep on
auto-answer
beep-on-
auto-answer
Boolean true/false
Default: false
If set to true, an alert
beep sounds when a call
is automatically accepted.
auto-
reconnect
Boolean true/false
Default: false
If set to true, the user
can resume a held call
with either the CTI appli-
cation or phone.
Allow beep on
auto-reconnect
beep-on-
auto-
reconnect
Boolean true/
false
Default: false
If set to true, a beep
sounds when the user
toggles between an ac-
tive call and a held call.

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing