Unify OpenStage User Manual

c06.fm
A31003-S2000-R102-16-7620, 02/2016
Provisioning Service, Developer’s Guide
251
Nur für den internen Gebrauch Phone Parameters - Provisioning
Certificates
radius-server-
ca1
PEM file
(single cer-
tificate or
certificate
chain
Note: If the XML
item received from
the provisioning ser-
vice is empty, this
means delete the
corresponding cer-
tificate at the phone.
Current RADIUS server CA certifi-
cate. For 802.1x network access
(using EAP-TLS, PEAP or EAP-
TTLS). To allow phone to verify cer-
tificate received from RADIUS serv-
er. Stored as encrypted within DAS
only. Certificate Management knows
the decryption key.
radius-server-
ca2
PEM file
(single cer-
tificate or
certificate
chain
Note: If the XML
item received from
the provisioning ser-
vice is empty, this
means delete the
corresponding cer-
tificate at the phone.
Next RADIUS server CA certificate,
to support transition in case the cer-
tificate on the RADIUS server should
change to a certificate signed by a
new CA.
send-url-
server-ca
<index=0>
PEM file
(single cer-
tificate or
certificate
chain
Note: If the XML
item received from
the provisioning ser-
vice is empty, this
means delete the
corresponding cer-
tificate at the phone.
First certificate to enable a secure
connection with the web server
specified for the "send URL" function
(see Section 4.4.5.3, "Send URL").
Available with firmware version V2.
send-url-
server-ca
<index=1>
PEM file
(single cer-
tificate or
certificate
chain
Note: If the XML
item received from
the provisioning ser-
vice is empty, this
means delete the
corresponding cer-
tificate at the phone.
Second certificate to enable a se-
cure connection with the web server
specified for the "send URL" function
(see Section 4.4.5.3, "Send URL").
Available with firmware version V2.
send-url-
server-ca
<index=2>
PEM file
(single cer-
tificate or
certificate
chain
Note: If the XML
item received from
the provisioning ser-
vice is empty, this
means delete the
corresponding cer-
tificate at the phone.
Third certificate to enable a secure
connection with the web server
specified for the "send URL" function
(see Section 4.4.5.3, "Send URL").
Available with firmware version V2.
Item name Type Values Description

Unify OpenStage Specifications

General

Display	Graphical LCD
Connectivity	Ethernet
Supported Protocols	SIP
Power over Ethernet	802.3af (PoE), depending on the specific model
Supported Codecs	G.711, G.729
Speakerphone	Yes
Headset Port	Yes
USB Port	No
Bluetooth	No
Humidity	10% to 90% non-condensing