Phone Parameters - Administration Nur für den internen Gebrauch
A31003-S2000-R102-16-7620 02/2016
92 Provisioning Service, Developer’s Guide
c04.fm
Applications
4.1.1.2 Modify Application
Regarding the provisioning interface, the modification of an application is the same procedure
as the creation. The XML-app-action item must be set to update, as in the following snip-
pet:
<Item name="XML-app-action" index="1">update</Item>
4.1.1.3 Xpressions
For Xpressions applications, the XML-app-special-instance item must be set to 1 (see
Section 4.1.1, "XML applications").
4.1.1.4 Messages Application
This is intended for a regular XML application with voicemail/mailbox functionality. When con-
figured on the phone, a press on x or will invoke this application. For messages appli-
cations, the XML-app-control-key item must be set to 4 and XML-app-special-
instance to 0 (see Section 4.1.1, "XML applications").
4.1.1.5 XMLPhonebook/Directory Application
This is a preconfiguration intended for a regular XML application with phonebook/directory fun-
ctionality. When configured on the phone, a press on u or will invoke this application, in
place of the personal (local) or corporate (LDAP) phonebook. For XML phonebook/directory
applications, the XML-app-special-instance item must be set to 2 (see Section 4.1.1,
"XML applications").
4.1.1.6 Phonebook/Directory Application
This is intended for a regular XML application with phonebook/directory functionality. When
configured on the phone, a press on u or will invoke this application, in place of the per-
sonal (local) or corporate (LDAP) phonebook. For phonebook/directory applications, the XML-
app-control-key item must be set to 2 and XML-app-special-instance to 0 (see Sec-
tion 4.1.1, "XML applications").
4.1.1.7 Call Log Application
This is intended for a regular XML application with call log functionality. When configured on
the phone, a press on w or will invoke this application. For Call Log applications, the
XML-app-control-key item must be set to 3 and XML-app-special-instance to 0 (see
Section 4.1.1, "XML applications").