Unilumin Upad III User Manual

UpadIII product manual
www.unilumin.cn 30
3.5.2 Set Coefficients for a New Module
1) Choose“ Topology or List” function, select the cabinet of new replaced module ,double
click the selected cabinet;
Fig 23【Select cabinet section of a new replaced module】
2) Set up the size of a module here, when it’s done, find out and select the position of the new
module;
Fig 24【Select module section on cabinet】
Module Size：First set up the size of a module here, when it’s done, find out and select the
position of the new module.

Unilumin Upad III Specifications

General

Brand	Unilumin
Model	Upad III
Category	Monitor
Language	English