UTV-P Product Manual
CAUTION!
The optimum displaying effect may fail to be achieved if you ignore the
following cautions.
1) Wear antistatic gloves when installing or repairing the product.
2) Ensure good ventilation for the LED display when designing the heat dissipation
solution.
3) Keep the storage environment of the LED display ventilated and dry, with a humidity
not exceeding 95%.
4) Use single-phase power supply for an LED display with the total power consumption
not exceeding 3 kW, and three-phase power supply for an LED display with the total
power consumption exceeding 3 kW.
5) Installing the LED display in the following places may result in an equipment failure
and reduce its lifespan: near the sea, in an area with salt and alkali or sulphurous
gases, near a kitchen exhaust position, or at a place where the difference between
indoor and outdoor temperatures is great. Consult our professional personnel at the
service center if the LED display must be installed in any of these places.
V
To Next Page
Loading...
