To Next Page

To Previous Page

UBio-X Pro2 User Guide 51

UNIONCOMMUNITY Co., Ltd.

Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,

Seoul, Korea (zip code: 05836)

Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,

E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.kr

3.6.2. Finger

The following screen appears if you select the [System] -> [Finger] in the main menu.

▶Basic setting: Same with the window at the left side

▶1:N Level (3~9)

It is the authentication level used in the 1:N

Fingerprint authentication. In case of 1:N

authentication, the authentication level is not set for

each user, so the authentication level of the terminal

is always the standard.

▶1:1 Level (1~9)

It is the authentication level used in the 1:1

Fingerprint authentication. But, in case of the user

whose 1:1 authentication level is not set ‘0’ (using the

authentication level of the terminal), it follows the 1:1

authentication level of the user.

▶Fake Finger Detection

It sets the LFD level to prevent the fake fingerprint input. The higher level of the LFD

level, the preventing function of the fake fingerprint input such as rubber, paper, film,

or silicon is strengthened, but the fingerprint also can be hard to enter if the finger is

dry too much.

▶FP template format

It determines the format of fingerprint template. When some applications using SDK

need another format of the fingerprint, the fingerprint template format of the terminal

can be changed. But, if using Alpeta server, it should be set the same with the

template format of the server.

- Union: It is the default setting and the volume is 400 bytes for each template. It is

the most optimized format related with all the functions using fingerprint (1:1

level, 1:N level, authentication speed, and fake fingerprint detection), and the

authentication can be fulfilled rapidly and correctly.

- ISO Standard: Fingerprint data is saved as ISO template which is 500 bytes for each

template.

- ISO Extended: Fingerprint data is saved as ISO template which is 600 bytes for each

template.

If you change the template format of the fingerprint, the following message box

appears.

Union Community UBio-X Pro2 User Manual

Questions and Answers: