4.CALIBRATION
27
4-11. Unit
Set the unit of the load to be displayed. Selection can be made from the following.
None, kg, g, t, N, kN, Nm, N/m
2
, Pa, kPa, MPa, bar
1）Press the MODE button.
2）Press the CALIBRATION button.
3）Press the PAGE button to select the page and press the UNIT button.
4）Select the unit and determine with the OK button.
Setting call Page 2
→→
Calibration
Scroll with the and buttons.
* A change of unit does not affect the indicated value (calibration value)
.
To Next Page
Loading...
