UAD Powered Plug-Ins Manual - 259 - Chapter 27: Neve 88RS Channel Strip
Power The Power switch determines whether the plug-in is active. This is
useful for comparing the processed settings to the original signal
or bypassing the plug-in to reduce the UAD DSP load (load is not
reduced if UAD-2 DSP LoadLock is enabled).
Toggle the switch to change the Power state; the switch is illumi-
nated in red when the plug-in is active.
Note: You can click-hold the power switch then drag it like a slider to quickly
compare the enabled/disabled state.
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-NEVE’s trademarks are being made with written permission from AMS-Neve Limited.
The Neve 88RS at Skywalker Sound in California
To Next Page
Loading...
Need help?
General
